Hand Wash Basins
- Round Base trough to eliminate puddling.
- Integral splashback.
- Photo-electric control.
- Low voltage control circuit.
- Available in up to 5 stations.
- Standard sink outlet size.
- Standard water inlet size per station.
- Fabricated from 304 grade stainless steel.
- Satin polish finish.
- Full front skirt.
- Front support leg or pedestal options available on request.
Technical Specifications
- Water feed inlet ½"BSP per station, maximum water pressure at inlet 4.5 bar.
- Maximum water temperature at inlet 45°C.
- Standard 1½"BSP waste outlet per sink, trap NOT included.
- Maximum flow rate per station: 17 litres per minute.
- Electrical feed requirements: a suitable RCCD protected 240V, 3amp, single phase supply.
- 1 Man = 456mm wide
- 2 Man = 856mm wide
- 3 Man = 1256mm wide
- 4 Man = 1656mm wide
+44 (0) 1234 826 233